Petal & Pigment / Studio notes
A good page starts at the printer
Choose the PDF that matches the paper in your tray.
1. Download a blank page
Open any square design in the main gallery and select A4 PDF for 210 × 297 mm paper or Letter PDF for 8.5 × 11 inch paper. Both files contain one portrait page of uncolored vector line art. PNG downloads from these sixteen designs contain your colored version and are square. Bookmarks use a separate fixed-size printing workflow: print those sheets at 100% without Fit or Shrink.
2. Check the print preview
Open the PDF in your PDF viewer. Select the matching paper size and portrait orientation. Start with Actual size or 100% scale. The artwork has at least 42 points (about 14.8 mm) of side margin in the file. If your printer's preview clips an edge, select Fit to printable area and check again.
3. Check one sheet first
Print one page before a larger run. The outline is approximately 1.5 points on paper, and the file is vector-based so zooming does not reduce its geometric detail. Printer quality and paper texture still affect the printed result.
4. Pick materials for your printer
Use paper weight and media settings supported by your printer's manual. For markers or wet media, check the paper manufacturer's suitability and protect the surface underneath. This studio has not tested your printer, ink or art materials.